Owner Resources

Electrician Insurance for Jobs in Other States: How It Works

Gloved hands using pliers to trim a wire at a wall-mounted fixture plate

When you take a job in another state, three things must line up: your license has to be valid where the job is, your workers’ compensation has to reach employees working there, and your agent has to know before the crew leaves. General liability and auto usually follow the work more easily, while workers’ compensation is written state by state.

Why does crossing a state line change your insurance?

Because insurance and licensing are both organized by state. A license is issued by a state or local office for work in its jurisdiction. A workers’ compensation policy is written to provide the benefits each state’s law requires, and it lists the states where it applies. Other lines are more flexible, but even they are priced and described around the operation the insurer was told about.

An out-of-state job is not unusual for an electrical contractor. A commercial customer opens a location across the border, a general contractor brings a trusted sub to a project in a neighboring state, or storm work draws crews into areas they do not normally serve. Each of those jobs is easier to insure when it is planned for than when it is discovered after a crew has already left.

Do you need a license in the other state?

Generally, yes, for the work you perform there. Electrical licensing is set by states and, in some places, by cities and counties, and a license from your home state does not carry over unless the other jurisdiction recognizes it. Some states have agreements that recognize licenses from certain other states, and some do not. Our post on whether electricians need a license explains the general shape of the licensing ladder.

Check with the licensing office where the job sits before you bid. Ask whether your license is recognized, whether the business needs to register, whether a permit is required and who may pull it, and whether a locally licensed supervisor must be on the job. Our state pages describe licensing in each state where we have verified the details, and our post on what licensed and insured means for an electrician explains why both halves matter to a customer in any state.

How does workers’ compensation follow a crew?

Through the states listed on the policy. A workers’ compensation policy names the states where it provides coverage, and many policies also include other-states coverage, which extends benefits to employees injured in other states listed for that purpose. If a crew works in a state the policy does not reach, an injury there can create a serious gap. Our workers’ compensation coverage page explains how the policy is structured.

A few states work differently. In the monopolistic states, North Dakota, Ohio, Washington and Wyoming, workers’ compensation is provided through the state fund rather than the private market, and a private policy’s other-states coverage generally does not reach them. A contractor sending employees into one of those states needs to arrange coverage through that state’s fund, and should ask its agent how employers liability will be handled there.

Before the crew crosses the state line
License valid where the job is, confirmed with that state or local office
Workers’ compensation reaches the state, or is arranged through the state fund in a monopolistic state
General liability and auto insurer told about the work; vehicles and drivers scheduled
Contract insurance requirements read; certificates issued before mobilizing
Tell the agent before the crew leaves, not after.
An out-of-state electrical job is easiest to insure when each item is confirmed before the crew travels.

Do general liability and auto follow you across state lines?

Usually more easily than workers’ compensation, but not without attention. General liability is often written with a coverage territory broad enough to include work in other states, and commercial auto generally covers scheduled vehicles wherever they are driven. The insurer still priced the policy on the operation it was told about, and a significant change in where or how the business works should be reported.

Two details deserve a check. First, the business description and classification on the general liability policy should still fit the out-of-state work, especially if that work is a different type from your usual jobs. Second, vehicles that will be garaged in another state for a long project, or drivers hired locally, should be reported so the auto schedule stays accurate. Our post on commercial auto for electricians with multiple vehicles covers keeping a growing schedule current.

What about hiring local workers for the job?

Local hires change the workers’ compensation picture. An employee hired in another state to work there is generally an employee in that state, and the policy needs to provide that state’s benefits. Payroll for local hires should be reported in the right state and the right class, and the audit at the end of the policy term will look for it.

Using local subcontractors instead raises a different question. Collect each subcontractor’s certificate of insurance before they start, because a workers’ compensation audit can treat an uninsured subcontractor as part of your payroll. Our post on workers’ comp for electrical staffing agencies explains how coverage divides when workers come through a third party.

Real-World Scenario: An electrical contractor wins a project for a retail customer opening a store in a neighboring state and sends a small crew for several weeks. No one tells the agent. Midway through the job, an electrician is injured on site, and the claim reveals that the state was not listed on the contractor’s workers’ compensation policy. The gap could have been closed with a call before the crew left, by adding the state to the policy and confirming the coverage on a new certificate.

Do tools and equipment travel with the coverage?

Usually, but check the details. A contractors equipment policy is often written to cover scheduled tools and equipment wherever they are, including in transit, though some policies limit the territory or treat equipment left at a distant jobsite differently. Before sending a trailer of tools, test gear and materials to another state for weeks, confirm the policy’s territory and how it treats equipment stored on a jobsite overnight. Our post on electrical equipment insurance explains how tools, test gear and materials are scheduled.

Materials bought for the job deserve the same attention. Wire, gear and fixtures staged at an out-of-state site are exposed to theft and weather, and a long project far from your shop leaves them unattended more often than usual. Ask whether materials in transit and at the jobsite are covered, and for how long they can sit before installation without losing coverage.

Do contracts in other states ask for anything different?

Sometimes. Owners and general contractors in another state may require additional insured status, specific limits, waivers of subrogation or proof of workers’ compensation in their state. Some will not let a crew on site until a certificate showing the right coverage arrives. Our post on what general contractors require from electrical subs covers the most common requirements.

Read the insurance section before signing and send it to your agent. A certificate that lists your home state only may not satisfy a contract for work elsewhere, and fixing that after mobilization can delay the start of the job.

How does storm and emergency work fit in?

Storm response draws crews across state lines quickly, often with little warning. The same checks apply, just faster: confirm the license or any emergency recognition the state offers, confirm workers’ compensation reaches the state, and tell the agent which vehicles and crews are going. A short checklist kept ready before storm season makes the call to the agent quick when the work arrives.

Storm work also changes the kind of work crews do. Restoration after a storm can mean working on damaged services, temporary power and utility-adjacent tasks that differ from a crew’s normal jobs, often in long shifts and difficult conditions. Tell your agent what the crews will actually be doing, not just where they are going, so the general liability description and the workers’ compensation classes still fit the work. Our power-line and utility services page describes the storm response side of the trade.

What should you tell your agent?

The state and city, the dates, the type of work, how many employees will travel, whether you will hire locally, which vehicles and equipment will go, and what the contract requires. With those details, your agent can confirm each policy and issue certificates that match. The OSHA standards page for electrical contractors applies across state lines, so your safety program travels with the crew even when the policies need adjusting. Storm work is the most common reason crews cross state lines on short notice; see storm restoration electrician insurance.

What is the next step?

Send the details of your next out-of-state job with a quote request or a call before the crew leaves. We confirm that the license, the workers’ compensation and the rest of the program reach the state where the work is.

The bottom line

When an electrical contractor takes a job in another state, the license has to be valid where the job is, workers’ compensation has to reach employees working there, and the agent has to know before the crew leaves. General liability and auto usually follow the work more easily than workers’ compensation, which is written state by state and handled through the state fund in the monopolistic states. Tell your agent about every out-of-state job before it starts.

Frequently asked questions

Does my electrician insurance cover jobs in other states?

Parts of it usually do, but not automatically and not in the same way. General liability and commercial auto are often written to apply across the country, though the insurer still needs to know about the work. Workers’ compensation is written state by state, so employees working in another state need coverage that reaches that state. Tell your agent before the crew travels so each policy can be checked.

Do I need a license in the other state?

Generally the license has to be valid where the work is performed, and electrical licensing is set by states and sometimes by cities and counties. A license from your home state does not carry over unless the other state recognizes it. Check with the licensing office in the state where the job sits before you bid, and confirm whether a permit and a locally licensed supervisor are needed.

How does workers’ comp work for employees in another state?

A workers’ compensation policy lists the states where coverage applies, and many policies also include other-states coverage that extends benefits to employees injured in states listed for it. That coverage generally does not reach the monopolistic states, North Dakota, Ohio, Washington and Wyoming, where coverage comes from the state fund. Tell your agent which states your crews will work in so the policy lists them.

What should I tell my agent before an out-of-state job?

Tell the agent the state and city, the dates, the type of work, how many employees will travel, whether you will hire anyone locally, which vehicles and equipment will go, and what the contract requires for insurance. With that information the agent can confirm workers’ compensation reaches the state, check the general liability and auto, and issue certificates that meet the contract.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Electrical Guard Insurance, a specialty insurance agency placing electrical contractor coverage in 48 states across a 25-carrier specialty panel. He maps an electrical contractor’s jobs on the calendar against the states each policy is written for, because the gaps in cross-state work usually show up as a crew working somewhere the policies were never told about. Connect via the Electrical Guard Insurance quote form or call 317-942-0549.

Insure your electrical operation with a CPCU-led agency

Tell us how you work — residential service and remodel, commercial and industrial systems, or power-line and utility work — and we will market it to carriers that write the electrical class.