Coverage Explained

Workers Comp for Electrical Staffing Agencies Explained

A technician in coveralls holding a clamp meter in front of an open control panel of breakers and wiring

In a typical staffing arrangement the staffing agency is the employer of record and carries the workers’ compensation for the electricians it places. The electrical contractor that directs the work, the host, still has exposure of its own, so both sides should confirm coverage and write the duties into their contract before the first placement.

Who is the employer when an agency places an electrician?

The staffing agency is usually the employer of record. It hires the electrician, runs payroll, withholds taxes and carries workers’ compensation for the placement. The electrical contractor that receives the worker, the host, directs the day-to-day work, supplies the jobsite and controls much of the safety environment the electrician works in.

That split is why both sides have exposure. The agency carries the policy, but the host decides what the electrician does and where. Depending on the state and the facts, a host can be treated as an employer of the placed worker for some purposes, and an injured worker or the agency’s insurer may look to the host after an injury. The arrangement works when both sides know where their coverage starts and stops.

What does the staffing agency’s workers’ compensation cover?

The agency’s policy covers injuries its employees suffer in the course of their work, including work done at a client’s jobsite, under the state’s rules. For an electrical staffing agency, that means shock, arc flash, falls and the strains of construction work, all of which belong in the account. Our post on arc flash, electrocution and workers’ comp explains why electrical injuries are read as severe exposures.

The policy also includes employers liability, which answers certain suits that fall outside the workers’ compensation benefit. Whether those protections extend to a client depends on the policy. An alternate employer endorsement extends the agency’s coverage to a named client as an alternate employer, which is the most direct way to bring the host inside the agency’s policy. Ask whether it is available before relying on it.

How should placed electricians be classified?

As electricians. Workers’ compensation payroll is classified by the work each employee does, and an electrician placed on a jobsite is doing electrical work wherever the agency’s office is. Agencies that place several trades, or that also place office staff, need to split payroll by the work actually done. Our post on workers’ compensation for electricians explains how class codes and experience modifiers work.

Misclassification usually surfaces at audit. When placed electricians have been reported in a lower-rated class, the audit corrects it, and the adjustment can be large. It can also raise coverage questions if the insurer did not know it was insuring electrical placements at all. An electrical staffing agency should make sure its insurer has agreed to write the trades it places.

Who answers for a placed electrician
The staffing agencyEmployer of record; carries workers’ compensation and employers liability; classifies payroll as electrical work
The electrical contractor as hostDirects the work and the jobsite; confirms the agency’s certificate; asks about an alternate employer endorsement
The contract between themAssigns safety duties, insurance requirements and indemnity
Confirm coverage before the first electrician arrives.
When a staffing agency places an electrician, workers’ compensation responsibility divides between the agency, the host contractor and their contract.

Why do electrical contractors use staffing agencies?

Usually to cover a peak in work without adding permanent payroll. A large commercial project, a storm response or a season of heavy demand can call for more electricians than the business keeps on staff, and an agency can supply them quickly. Our post on hiring and retaining licensed electricians covers the longer-term staffing side of the business.

The insurance point is that a short-term placement still carries full exposure. An electrician placed for a few weeks faces the same shock, arc-flash and fall hazards as a permanent employee, on the same jobsites, under the same supervision. The coverage should be confirmed with the same care, whatever the length of the placement.

Do placed electricians need to be licensed?

That depends on the state, the work and the supervision, and it is a licensing question before it is an insurance one. Placed electricians often work under the host’s license and supervision, and the host should confirm that each placed worker holds the credential the work requires. Our post on whether journeyman and master electricians need insurance covers how insurance follows the business the work runs through, which applies to agency placements as well.

Licensing also reaches the paperwork. If a placed electrician’s credential does not match the work assigned, the problem can surface during a claim or an inspection, and neither side’s policy is a substitute for the right license. Ask the agency how it verifies licenses, and keep a record of what you checked.

What should an electrical contractor check before using an agency?

Check the agency’s coverage before the first placement, not after the first injury. Ask for a certificate of insurance sent directly from the agency’s insurance agent, showing workers’ compensation and employers liability in force for the period of the placement. Confirm that the agency’s insurer knows it is placing electricians, and ask whether an alternate employer endorsement naming your business is available.

Then check your own side. Ask your agent how your workers’ compensation policy treats staffing agency workers, and keep the agency’s certificates on file for every period workers were supplied. At audit, payments to an agency without proof of its coverage may be treated as your payroll. Our post on workers’ comp cost levers covers how audits and payroll records affect the premium.

What about general liability for placed electricians?

Workers’ compensation is only part of the picture. If a placed electrician’s work damages a customer’s property or injures a third party, the question becomes whose general liability answers. Because the host directs the work, the host’s general liability usually responds for its operations, and the contract between the agency and the host often allocates responsibility through indemnity and insurance requirements.

Read those clauses closely. An agency contract that asks the host to indemnify the agency, or a host contract that asks the agency to name the host as an additional insured, changes who bears a loss. Our post on what general contractors require from electrical subs covers the indemnity and additional insured language that tends to travel with construction contracts, and our post on additional insured for electricians explains what that endorsement does and does not give the party it names. A staffing agency that places electricians on construction sites should expect to be asked for both, and should have its own general liability written to describe placements rather than office staffing alone.

How do safety duties split between agency and host?

Both sides have a part. The host controls the jobsite, so it is best placed to provide site-specific training, protective equipment suited to the task and supervision. The agency should screen and place electricians whose licenses and experience match the work, and should know the conditions its workers are sent into. The OSHA guidance on protecting temporary workers covers how staffing agencies and host employers approach those responsibilities.

Writing the split into the contract avoids arguments later. Name who provides training, who supplies protective equipment, who reports injuries to whom and how quickly the other side is told. An injury report that reaches the agency late can complicate the claim, and the electrician’s care is the first thing to protect. The OSHA electrical overview is a useful common reference for the hazards both sides are managing.

Real-World Scenario: An electrical contractor takes on a commercial project and brings in two electricians through a staffing agency. One suffers a shock injury while working on a panel the host’s foreman assigned. The agency’s workers’ compensation policy handles the claim, because the agency is the employer of record and its insurer knew it placed electricians. The host’s audit later counts the agency workers as covered, because the contractor had kept the agency’s certificate on file for the whole project.

What should an electrical staffing agency tell its insurer?

Everything about the placements. Tell the insurer which trades you place, what kind of sites they work on, whether they do energized work or work at height, and which states they work in, including any monopolistic states where the state fund is the source of workers’ compensation. Each state page on this site notes how workers’ compensation works where we have verified it. An insurer that has agreed to write electrical placements, on payroll classified as electrical work, is one whose policy will hold up when it is needed.

What is the next step?

If you are an electrical contractor using staffing agencies, or an agency placing electricians, send a description of the arrangement and your contracts with a quote request. We review both sides of the placement and confirm that the coverage matches the work.

The bottom line

In a typical staffing arrangement the agency is the employer of record and carries workers’ compensation for the electricians it places, while the electrical contractor that directs the work still has exposure of its own. Both sides should confirm the agency’s coverage before the first placement, classify the payroll as electrical work, and write the safety, insurance and indemnity duties into the contract between them.

Frequently asked questions

Who pays workers’ comp for an electrician placed by a staffing agency?

In a typical arrangement the staffing agency is the employer of record and carries workers’ compensation for the electricians it places. The electrical contractor that directs the work is still exposed in some situations, depending on the state and the facts, so it should confirm the agency’s coverage with a current certificate and ask how its own policy treats the arrangement before the first placement.

What is an alternate employer endorsement?

It is an endorsement to the staffing agency’s workers’ compensation policy that extends the policy’s protection to a named client as an alternate employer. It helps a host contractor that could be treated as an employer of the placed worker. Whether it is available and what it covers depends on the insurer, so ask the agency and your own agent to confirm it in writing.

Can a staffing agency classify placed electricians as clerical?

No. Workers’ compensation payroll is classified by the work the employee does, and an electrician placed on a jobsite is doing electrical work. Misclassified payroll is usually corrected at audit, which can mean a large adjustment for the agency and a coverage question for everyone involved. The agency should classify placed electricians in the class its insurer uses for electrical work.

Does my workers’ comp audit include staffing agency workers?

It can. If your auditor cannot confirm that the agency carried workers’ compensation for the workers it supplied, the payments to the agency may be treated as payroll on your policy. Keep a current certificate from the agency on file for the whole period of the placement, and keep the agreement that shows the agency was the employer of record.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Electrical Guard Insurance, a specialty insurance agency placing electrical contractor coverage in 48 states across a 25-carrier specialty panel. He reviews staffing arrangements from both sides of the contract, because an electrician placed by an agency is covered best when the agency, the contractor and their policies all agree on who answers for what. Connect via the Electrical Guard Insurance quote form or call 317-942-0549.

Insure your electrical operation with a CPCU-led agency

Tell us how you work — residential service and remodel, commercial and industrial systems, or power-line and utility work — and we will market it to carriers that write the electrical class.