Coverage Explained

Workers Compensation for Electricians: How Class Codes and Mods Work

An electrician in a hard hat standing on a mobile work platform, reaching overhead to run cable along a bare concrete ceiling

Workers compensation for electricians is built from three parts: your payroll sorted into class codes, the rate each class carries for its hazard, and an experience mod that adjusts the result for your claims record. Electrical work sits at the severe end of that system.

How does workers compensation work for electricians?

Workers compensation answers injuries to your own crew when they are hurt on the job. It has two parts. The first pays medical treatment and a portion of lost wages under your state’s workers compensation law, regardless of fault. The second, employers liability, responds to suits that fall outside that benefit. For an electrician, that includes the injuries that define the trade: electrocution, arc-flash burns, shocks and falls from ladders and lifts.

The cost of this coverage is not set by shopping for a number. It comes from a rating system with three moving parts, which this post walks through. The workers compensation page covers the policy itself, and our post on workers compensation cost levers covers what an owner can do to influence the result. This post explains how the machinery works.

What is a class code, and how does it apply to electrical payroll?

A class code is a classification that describes the kind of work an employee does. Your payroll is sorted into classifications, and each classification carries its own rate that reflects the hazard of that work. An electrician working on energized equipment, a helper, a dispatcher and an estimator are not the same risk, and the system does not rate them as the same.

The sorting follows the work performed, not the job titles on the payroll. Electrical field work, office work and different kinds of field work can fall into different buckets, and the descriptions carriers use are specific. We do not print class-code numbers here, because the right assignment depends on the work your crews actually do and on your state, so the classification should be confirmed in your own policy and not copied from a list.

How workers compensation cost is assembled
PayrollSorted by the work each employee does
Class codesEach classification carries a rate for its hazard
Experience modAdjusts the result using your claims history
AuditTests the payroll and the sorting after the year
State-fund states and Texas change how the coverage is bought.
Payroll, class codes, the experience mod and the audit combine to build the cost.

A change in the business can change the classification. Adding a person who works in the field, beginning a different kind of electrical work, or moving into power-line scope puts payroll into a different bucket, and the system follows the work and not the old policy. Tell the agent when the work changes and ask how each group of employees will be classified. The same applies to anyone you carry on the payroll who is not a regular field employee, such as an owner or officer, and to subcontractors, which each have their own treatment in the rating rules. Our post on hiring and retaining licensed electricians covers the staffing side of that change.

How is the premium built from payroll and class?

The structure is a chain. Payroll in each classification is multiplied by that classification’s rate, the results are added together, and the experience mod then adjusts the total up or down. Each link depends on the one before it, so an error early in the chain carries all the way to the end.

That is why we start with the payroll split. If field payroll is described as office work, or the reverse, the premium reflects a company that does not exist. A classification that overstates the hazard costs you more than it should, and one that understates the work you perform is a problem waiting to appear at audit.

What is an experience mod, and how is it built?

The experience modification compares your claims history with that of other employers doing the same work. A record lighter than your peers pulls the factor below the baseline, and a heavier record pushes it above. It is built from recent history, so it behaves like a rolling reflection of your actual claims rather than a one-year event.

Two things follow. A clean stretch compounds in your favor and a bad year follows you for a while, so the mod rewards consistency. And because it is built from your own history, it is the clearest proof that part of your workers compensation cost is yours to author. We do not publish mod values, and we do not promise one: the mod is calculated from your record and cannot be quoted in advance.

Why do electrical and line work sit at the severe end?

The classifications sort employers by the hazard of the work, and electrical work puts a crew on and around energized systems. An arc-flash event releases intense heat and pressure in a fraction of a second and can cause catastrophic burns. Power-line work adds height, high voltage and the outdoor hazards of overhead and underground systems, and it sits among the highest-severity classifications there is.

That severity is why the coverage is written with care and not treated as a formality. It is also why the experience mod matters in this trade: the claims that move it are larger when the injury is an electrocution or a burn. Our post on workers compensation, arc flash and electrocution explains the exposure itself.

How should an electrician read the numbers on a policy?

A policy shows the classifications, the payroll basis for each, the rates and the experience mod. Read them in that order. First check that each classification describes work you actually do. Then check the payroll basis, which is an estimate that the audit later tests. Then look at the mod and ask where it came from. If any step surprises you, ask the agent to walk through it before you bind, not after the audit.

It also helps to separate what you can influence from what the system sets. The class description follows your work, the rate follows the hazard, and the mod follows your history. Only the last is something your own habits shape over time, which is where the cost levers post picks up.

What happens at the payroll audit?

At the end of the policy period, the carrier audits payroll to check what was reported against what was paid and how it was classified. A clean audit is dull. Clean records, a clear split between classes and an understanding of how overtime, subcontractors and any owners or officers on the payroll are treated give the audit little to dispute.

The audit also keeps the system honest in both directions. A payroll classified to the work performed gets the rate that fits it, and a payroll described to look cheaper than it is gets corrected after the fact. The goal is accuracy, not gaming the classification.

Real-World Scenario: An electrical contractor runs a small field crew and one person in the office. At renewal the agent asks for payroll split between the electricians in the field and the staff who never leave the office, and asks whether anyone does a different kind of work. The owner supplies the split from payroll records. At the end of the year, the audit confirms the classification, and the contractor’s experience mod reflects a record with no serious claims. The contractor never has to argue about what the crew does, because the split was documented from the start.

Does a mod follow the business or the owner?

The experience mod belongs to the business and its history. It is built from the claims record of the employer, so it does not reset because a crew member moved on. If you buy, sell or restructure a business, ask your agent how the history carries over, because the answer affects the rating of the next policy. Our post on business structure for electrical contractors explains how entity decisions connect to the insurance, and our post on how to prepare an electrical business for sale covers the sale side of that question.

What changes in state-fund states and in Texas?

The system above describes the private market. North Dakota, Ohio, Washington and Wyoming are monopolistic states, where workers compensation is bought through the state fund and not from a private insurer. In those states the rating and the experience calculation run through the fund, and the employers liability side needs separate attention, often through a stop-gap endorsement on another policy.

Texas is different in another way. Workers compensation is generally elective for most private employers there, and an electrical business may opt out, but it gives up the common-law defenses that comp normally provides and is exposed to direct employee-injury suits. General contractors and utilities can require comp regardless, so a Texas electrical contractor may carry it anyway. Our state pages cover each state’s workers compensation posture. For where to buy a policy, see where to get workers comp for your electrical employees, and for crews in more than one place, workers comp for electrical firms with multiple locations.

What is the next step?

Bring your payroll split, a description of what each group of employees does, and your current mod worksheet if you have one. Send them with a quote request, and we check the classification against the work before we present the account. The coverage overview shows how workers compensation fits with the rest of the program.

The bottom line

Workers compensation for electricians is built from three parts: your payroll, sorted into class codes that describe the work each employee does; the rate each class carries for its hazard; and an experience mod that raises or lowers the result based on how your claims compare with other employers doing the same work. Electrical work sits at the severe end of the classifications, the payroll audit checks the sorting, and four state-fund states and Texas change how the coverage is bought.

Frequently asked questions

What is a class code in workers compensation for electricians?

A class code is the classification that describes the kind of work an employee does, and each classification carries its own rate that reflects the hazard of that work. Your payroll is sorted into those classifications, so an electrician working in the field and an office employee are not rated alike. Electrical work, and line work most of all, sits among the higher-hazard classifications.

What is an experience mod for an electrical contractor?

The experience modification, or mod, is a factor that raises or lowers your workers compensation cost based on how your claims history compares with other employers doing the same work. A lighter claims record than your peers pulls the factor down, and a heavier one pushes it up. It is built from your own recent history, so the safety work you do now shows up in later years.

How is workers compensation premium calculated for an electrician?

The rating system does the arithmetic, not a guess. Your payroll is sorted into classifications, each classification carries a rate for its hazard, and the experience mod adjusts the result up or down. We do not quote a figure on a web page. We make sure payroll is classified to the work your crews actually do and that your claims history is presented accurately.

Do electricians need workers compensation in every state?

Nearly every state requires an employer with employees to carry it, but the rules differ. North Dakota, Ohio, Washington and Wyoming require coverage through the state fund, and Texas generally makes it elective for most private employers, though general contractors and utilities can require it regardless. Check your own state’s rule and your contract requirements.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Electrical Guard Insurance, a specialty insurance agency placing electrical contractor coverage in 48 states across a 25-carrier specialty panel. He places workers compensation for electrical crews and reads the payroll split first, which work is field and which is office, because the class assignment drives the rate and the audit later tests whether the split was honest. Connect via the Electrical Guard Insurance quote form or call 317-942-0549.

Insure your electrical operation with a CPCU-led agency

Tell us how you work — residential service and remodel, commercial and industrial systems, or power-line and utility work — and we will market it to carriers that write the electrical class.