Owner Resources

Where Can a New Electrician Get the Insurance Needed to Get Licensed?

An electrician in a hard hat standing on a mobile work platform, reaching overhead to run cable along a bare concrete ceiling

A new electrician buys the insurance a license may call for from an insurance agency that writes electrical contractors. You apply for general liability first, add workers compensation when you hire, and receive a certificate to hand your licensing office. What that office accepts as proof is its decision, so ask it first.

Where does a new electrician buy the insurance a license may call for?

The place to buy it is an insurance agency, and the better choice is one that writes electrical contractors as its work, not as a side line. Our post on which insurance agency specializes in electrical contractors explains what to look for. The agency collects a description of the business, places the policy with a carrier and issues the certificate you hand to the licensing office.

What the agency cannot do is decide what your licensing office will accept. That is set by the board or office that issues the license, which is why the first call is to them. The insurance conversation goes much faster when you can say exactly what proof is needed and by when.

What insurance is required for an electrical contractor license?

There is no federal electrician license, so there is no federal insurance rule to point to. Whatever your state board or local office asks for appears in its own application materials, and those materials can change. We do not list requirements here, because we have not verified every office and a stale list would do more harm than none.

Our post on whether electricians need a license owns the licensing side. It explains the three broad postures the states fall into: a state electrical license with an apprentice-to-master ladder, electrical work under a contractor classification, and no statewide license with cities and counties setting the rules. This post picks up at the next step, which is where the insurance comes from once you know which posture you are in.

What should you ask the licensing office before you buy?

Ask four plain questions and write down the answers:

  • Does the office ask for proof of insurance, and for which kinds of coverage?
  • In what form does it want that proof, and does the certificate have to name particular wording?
  • When does it want the proof, with the application or after approval?
  • Does the proof need to name the business that holds the license rather than you personally?

The last question is the one new owners miss. If you form an LLC or a corporation for the business, the policy should name that entity, and the paperwork should match what the licensing office will see. Our post on business structure for electrical contractors covers how the entity decision connects to the insurance.

From first call to certificate
Step one: ask the officeFind out what proof of insurance the licensing office wants, in what form and when
Step two: describe the businessTell an electrical agency what you will and will not do
Step three: bind the policyName the business that holds the license
Step four: hand over the certificateGive the office the evidence it asked for
The office decides what it accepts. The agency places the policy.
The licensing office sets the proof it accepts, and the agency places the policy and issues the certificate.

Which policies does a new electrical business buy first?

General liability is the base layer. It answers the third-party bodily injury and property damage that electrical work can cause, including the fire that can follow a finished installation, and a general contractor can ask for proof of it before you bid. Workers compensation becomes essential once you hire. Nearly every state requires an employer with employees to carry it, and it covers the arc-flash and electrocution injuries that define the trade.

The fire that can follow a finished installation is why completed operations matters so much to a business that is only starting out. A panel or connection you install this month keeps carrying load for years, and the policy has to answer for it after the last invoice is paid. Our post on general liability and completed operations explains the trigger, and it is worth reading before you choose a policy.

Depending on how you operate, you may also need commercial auto for your trucks and contractors equipment for the tools and test equipment you carry. The sequence matters less than the principle: get insured before the first energized job, because coverage is a gate to winning work as well as a protection after something goes wrong.

Which comes first, the license or the policy?

The order is not the same everywhere, and we are not going to guess at yours. Some offices ask for proof of insurance with an application, and some ask for it at another stage. A certificate is issued after a policy is bound, so the practical path is to ask the office when it wants proof, get a quote early so you know what the policy involves, and bind it when the timing calls for it.

A quote also gives you a realistic picture of what the first year costs to run, which matters when you are deciding when to hire and what to drive. Getting a quote does not commit you to buying a policy. It tells you what the program looks like and lets you ask the licensing office the right follow-up questions. Waiting until the office asks for a certificate puts you under a deadline you could have avoided.

What does a new business tell an agent without a history of its own?

A new electrical business has no operating record, so the description of the work carries more weight than it would for an established company. Be specific about what you will do and what you will not do: residential service and remodel, commercial systems, or something else. Say whether you will work energized, whether you will hire in the first year, what you will drive and what tools you will own.

Your own background matters here, and so do the contracts you expect to sign. If a general contractor has already told you what it will ask for, bring that wording. Our post on what general contractors require from electrical subs explains what those requests look like.

Real-World Scenario: A journeyman electrician leaves a larger shop to open his own, forms an LLC and calls the state licensing office. He learns what proof of insurance the office wants and when, and writes it down. He then asks an agency that writes electrical contractors for a general liability quote that names the LLC, and tells the agent he plans to hire one helper within the year. The agent explains that workers compensation will be added when the helper starts, and the certificate arrives in time for the office’s deadline. Because he asked the office first, he did not buy a policy that needed to be rewritten.

Which mistakes do new electrical businesses make with insurance and licensing?

A few are worth naming, because each one is avoidable:

  • Buying a policy before asking the licensing office what proof it wants, then finding the policy has to be changed.
  • Putting the policy in the owner’s personal name when the license will sit with a new company, so the paperwork does not match.
  • Leaving a planned hire out of the conversation, then adding workers compensation in a hurry when the helper starts.
  • Treating the certificate as the coverage. The certificate is evidence of a policy, not an added protection, and any wording a contract needs has to be on the policy itself.
  • Copying a friend’s path from another state. Licensing rules differ by state and sometimes by city, so the right path is your own jurisdiction’s.

None of these takes long to fix when it is caught early, and each is expensive when a deadline arrives first.

What if your state leaves electrician licensing to cities and counties?

A few states do not issue a statewide electrician license, and the rules are set locally, which means the answer can change from one jurisdiction to the next. In that setting the certificate of insurance and the written contract do more of the work a state credential would do elsewhere. A business that works across several jurisdictions may need to satisfy several local offices.

Keep your agent informed of where the crew actually works. Our state pages show each state’s licensing posture as a starting point, and the agent can tell you how the coverage should be described for the places you plan to work. Some licensing offices also ask for a bond; our post on electrical contractor license bonds explains how that differs from insurance.

What is the next step?

Call your licensing office, write down what it wants, and then ask for a quote with that list in hand. We start with the questions above and match the policy to the answers. If you are still weighing whether to start the business at all, our post on how to start an electrical business walks the whole sequence, and the coverage overview shows how each line fits once the business is running.

The bottom line

A new electrician buys the insurance a license may call for from an insurance agency that writes electrical contractors, starting with general liability and adding workers compensation when the first employee arrives. What your own licensing office accepts as proof, and when it wants it, is that office’s decision, so ask it before you buy, then bring the answer to the agent along with a plain description of the work you will and will not do.

Frequently asked questions

What insurance is required for an electrical contractor license?

There is no federal electrician license, so there is no single federal insurance rule. Whatever your state board or local office asks for is stated in its own application materials, and it can change. Ask the office what proof of insurance it wants, in what form and when, then bring the answer to an agent who writes electrical contractors so the policy is bound to match.

Where do I get a certificate of insurance for a license application?

From the agency that places your policy. A certificate is the evidence that a policy exists, and it is issued after the coverage is bound, so the practical order is quote, decision, bind, then certificate. Ask the licensing office what the certificate must show, such as the business name on the policy, so the agent can match it.

Is general liability enough for a new electrician?

General liability is the base layer, because it answers the third-party injury and property damage electrical work can cause, including a fire after the job. Workers compensation becomes necessary once you hire, and commercial auto and equipment coverage depend on the trucks and tools you run. Start with the base layer and add lines as the business takes on crew and vehicles.

What if my state has no statewide electrician license?

A few states leave electrician licensing to cities and counties, so the rules change as you cross into the next jurisdiction. In that setting the certificate of insurance and the written contract carry weight a state credential would carry elsewhere. Check each city or county office where you plan to work, and keep your agent informed of where the crew goes.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Electrical Guard Insurance, a specialty insurance agency placing electrical contractor coverage in 48 states across a 25-carrier specialty panel. He places general liability and workers compensation for electrical contractors working under very different state licensing postures, and he starts a new electrician’s conversation by asking what the licensing office wants to see before anything is priced. Connect via the Electrical Guard Insurance quote form or call 317-942-0549.

Insure your electrical operation with a CPCU-led agency

Tell us how you work — residential service and remodel, commercial and industrial systems, or power-line and utility work — and we will market it to carriers that write the electrical class.